Install 4G SIM Card

How to install Sim Card in HW0029-4G


1)Please shut down the power of the camera,

and open the cover ,see below picture

(图片1.pngTips : About how to turn off solar power IP Camera,please refer to video in this link : https://www.youtube.com/watch?v=Zz4Ww6eYB5o )


图片2.png

图片3.png


2)After open the cover, insert the 3G/4G SIM card,Please make sure your SIM card is insetted well ,then close the cover .

see below picture,


QQ截图20170329152005.jpg

图片4.png


3)Turn on the solar power camera 

(图片1.pngTips : About how to turn on solar power IP Camera,please refer to video in this link : https://www.youtube.com/watch?v=S4S836k4lyg )


4)If the above setting are done successfully,you can view this camera from your smart phone or in PC .


QQ截图20170329152037.jpg

图片5.png

(View in PC in LAN)


图片1.pngTips :

If viewing in LAN,you need to use the cellphone or laptop to search the wifi signal SSID: 4G signal,and connect it.


 QQ截图20170329152117.jpg                         


If canot view(it means,your sim card maybe not installed successfully ) ,please check the below steps :


1)Please input the 4G router (the router in solar camera) ip address” 192.168.1.1” in IE browser,So you can see the below picture.

图片6.png


2)In the picture ,you can see the camera 4G SIM card information :signal and flow situation,current user number and so on.

2.1)If the 4G SIM card connection status is disconnected, please check if your 4G SIM card is insertted correctly.

2.2)If the 4G SIM card connection status is connected, user(s) is 2/10,it means the 4G signal is connected successfully.

2.3)But when you see the user(s) is 1/10,it means the camera need to be fixed with the 4G signal of sim card in browser manually.

a,Please connect the camera with network cable.

b,Run the search tool software in your computer,then find your camera ip and access it.


图片7.png

图片8.png

c,Then click the 图片9.png button,so you will see the wireless setting,then access it 

Select the 4G signal and access it .


图片10.png

图片11.png


Note:the 4G signal default password is : 123456789 


d.After you set the 4G signal successfully, disconnect the network cable in a while, check if you can see the camera video by app 


If it is ok,it means the 4G signal is connected successfully.


If not,please check your 4G SIM card if have/open the flows,or change a SIM card,and have a try.