Set Wifi

How to set the wifi in App


1,Please make sure your camera is connected with RJ45/network cable &power adapter,and your cellphone is also connected the wifi,after open our APP E-view7 to add the camera ID and user,password,then click the save button.


图片40.png


2,After click the save button,you will see the camera is online.


图片41.png


3,Click the right side icon 图片17.png ,so you can see the camera wifi setting and other setting.


图片42.png


4,Access the wireless setting ,Search for the WIFI signals and choose the desired SSID, then enter the password ,and click the “Save” button,.

(Note:Please make sure there is no special symbol like “@ $ & *”in wifi password,Numbers and letters in passward are more recommended ).


图片43.png        图片44.png


5,The camera will reboot,when the camera finish rebooting,then unplug the network cable of camera.after about 30s,you can see the camera is online .


图片45.png







How to set the wireless in Browser


1,Access the wireless setting ,Search for the WIFI signals and choose the desired SSID.


2.Make sure that all parameters are the same like in your router, enter the WIFI network key.


(Note:Please make sure there is no special symbol like “@ $ & *”in wifi password,Numbers and letters in passward are more recommended ).


图片46.png


3.Click on “Check”, after 30 seconds,  the notification will show you if the WIFI settings are successful.


图片47.png


4.If correct, just go back to select “Apply”, then disconnect the network cable.


5.After about 1 minute,you open the search tool to search the camera ip,

If you can find the camera ip ,so the wifi is connect succeed,

If you cant find it after refresh the search tool for many times,

So you need to reconnect the network cable to the camera to set the wifi again.